What does leak detection without building work mean?
It means finding the exact point where the pipe is leaking before opening anything. The old way was to keep breaking into the wall or lifting the floor until you hit water; today that's unnecessary in almost every case.
The result is a small opening right above the break instead of half a bathroom ripped out. Less rubble, fewer days without the room and a cheaper repair.
Step by step: how we locate a leak
The order matters: first we confirm there is a leak and which section it's in, and only then do we choose the technique to mark the exact point.
- We check the meter with every tap closed. If it keeps turning, there's a leak even if you can't see it.
- We pressure-test each section to find out whether the leak is on the cold supply, the hot supply or the incoming main.
- We choose the technique for the type of pipe and where it runs: inside a wall, under the floor or buried in the garden.
- We mark the exact spot on the wall or floor and explain what needs opening.
The five techniques we use and what each is for
No single technique works for everything. We usually combine two or three to confirm the spot before opening up.
- High-precision digital pressure gauges: they measure the system pressure and pick up tiny drops that give away a hidden leak before it shows.
- Infrared thermography: the thermal camera picks up temperature differences you can't see. It's especially useful on hot-water pipes and underfloor heating.
- Ultrasound: pressurised water escaping through a break makes a sound our equipment picks up at up to 40 kHz, through walls, floor slabs and paving.
- Tracer gas: we inject an inert gas mixture into the pipe; it escapes through the leak and rises to the surface, where high-sensitivity sensors detect it. Ideal for buried pipes and gardens.
- Inspection cameras: a flexible micro-camera goes inside pipes and drain stacks to show breaks and blockages in real time.
Which technique does my case need?
It depends on where the pipe runs. In a Benidorm flat with pipes inside the walls, thermography and ultrasound are usually enough. In a villa in Altea Hills or La Nucía with the supply pipe crossing the garden, tracer gas is almost always the best option, because it doesn't rely on hearing the water.
If the problem is in a drain or a stack, the inspection camera comes in, the same one we use for drain unblocking. We decide during the visit, after the pressure test.
And once the leak is found?
With the spot marked, the leak repair only opens what's necessary. We record the leak and the repair with photos and video, and prepare the signed technical report so you can ask your water company to refund up to 30% of the water lost to the leak.
When should you call Fontanero Express?
We've spent more than 30 years finding leaks in homes, residential buildings and pools across the Marina Baixa. If you think you have a leak, call us on +34 600 58 20 20 or send us a photo or video on WhatsApp and we'll tell you which technique is needed.
You get a fixed quote before we start. Everything is explained on our leak detection without building work page.



